The back of a French door model pulled out from the kitchen wall, a thin water line running to the water inlet valve at the bottom and a quarter-turn shutoff on the wall behind it.

Whirlpool undercounter ice maker Replace Filter light flashing

Whirlpool's freestanding ice maker lights Replace Filter after 9 months or 2,000 gallons.

(844) 773-0701

Mon–Sat, 8am–8pm

  • Water supply and fill
  • Ice maker water inlet valve repair
  • Source: Whirlpool

Book a visit

Three short steps, about a minute.

or call (844) 773-0701

What Replace Filter light flashing
actually means.

Whirlpool's freestanding ice maker lights Replace Filter after 9 months or 2,000 gallons. The same light keeps flashing when a filter is not installed correctly, and a poorly seated or damaged filter can mean small, thin or no ice.

Whirlpool ice maker display

What to do when Replace Filter light flashing shows on the ice maker

Before you book,
in this order.

Each step comes from Whirlpool's own guidance for Replace Filter light flashing on its ice makers. Follow it to the end: the last card says whether this is a visit.

01

Take the filter out and check for cracks and for both O-rings.

02

Reinstall it and turn it until it reaches the locked position.

03

If it has reached 9 months or 2,000 gallons, fit a new one.

04

Restart the ice maker; if the light stays on, book a visit.

Still there?

It usually turns into ice maker water inlet valve repair. Book with the code and the model number.

What not to do

The flashing light is not always a request for a new filter; an unlocked filter causes it too. It is also not a drain or pump signal.

What you may
notice with it.

The ice maker problems Replace Filter light flashing tends to arrive with. Answer these at the ice maker before anyone is booked.

All problems

Where Replace Filter light flashing usually leads

Ice maker water inlet valve repair.

Water inlet valve and its fittings · low to moderate.

In Whirlpool's own words

The "Replace Filter" light only comes on after 9 months or 2000 gallons of water use.
Whirlpool Product Help: Filter Light Blinking - Freestanding Ice Maker Whirlpool Product Help: Filter Light Blinking - Freestanding Ice Maker

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Whirlpool freestanding (built-in or undercounter) ice makers covered by its Product Help pages.

Whirlpool Replace Filter light flashing ice maker repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a child filling two glasses with ice from the door dispenser in a bright family kitchen
For the heart of your home.

Questions
about Replace Filter light flashing.

Can I clear Replace Filter light flashing myself?
Take the filter out and check for cracks and for both O-rings. If it comes back, it needs a visit.
Why does the Whirlpool Replace Filter light flash right after I changed the filter?
Whirlpool says it keeps flashing when the filter is not installed correctly. Turn it fully into the locked position.
Can missing O-rings cause thin cubes in a Whirlpool undercounter unit?
Yes. Whirlpool lists missing or damaged O-rings among the causes of low ice, no ice or thin cubes.
How often does a Whirlpool ice maker ask for a new filter?
After 9 months or 2,000 gallons, whichever comes first. Very hard water can wear it out sooner.

Back to your everyday

Still showing Replace Filter light flashing?

Book with the code or the blink pattern written exactly as the ice maker shows it, the full model number, and whether there is any water on the floor — when there is a code, that is where the diagnosis starts.

(844) 773-0701 Schedule a repair