The back of a French door model pulled out from the kitchen wall, a thin water line running to the water inlet valve at the bottom and a quarter-turn shutoff on the wall behind it.

KitchenAid undercounter ice maker Replace Filter light flashing

KitchenAid's freestanding ice makers turn on Replace Filter at 9 months or 2,000 gallons, and flash it when the filter is not correctly installed.

(844) 773-0701

Mon–Sat, 8am–8pm

  • Water supply and fill
  • Ice maker water inlet valve repair
  • Source: KitchenAid

Book a visit

Three short steps, about a minute.

or call (844) 773-0701

What Replace Filter light flashing
actually means.

KitchenAid's freestanding ice makers turn on Replace Filter at 9 months or 2,000 gallons, and flash it when the filter is not correctly installed. A cracked filter or missing O-rings also lead to low ice or thin cubes.

KitchenAid ice maker display

What to do when Replace Filter light flashing shows on the ice maker

Before you book,
in this order.

Each step comes from KitchenAid's own guidance for Replace Filter light flashing on its ice makers. Follow it to the end: the last card says whether this is a visit.

01

Turn the filter to the locked position.

02

Remove it and check it for cracks and missing O-rings; replace it if either is found.

03

Fit a new filter if it is at 9 months or 2,000 gallons.

04

If the indicator stays on after a restart, book a visit.

Still there?

It usually turns into ice maker water inlet valve repair. Book with the code and the model number.

What not to do

This light does not measure water quality. An old filter and a loose one look the same on the panel.

What you may
notice with it.

The ice maker problems Replace Filter light flashing tends to arrive with. Answer these at the ice maker before anyone is booked.

All problems

Where Replace Filter light flashing usually leads

Ice maker water inlet valve repair.

Water inlet valve and its fittings · low to moderate.

In KitchenAid's own words

The "Replace Filter" light will continue to flash if the filter is not installed correctly.
KitchenAid Product Help: Filter Light Blinking - Freestanding Ice Maker KitchenAid Product Help: Filter Light Blinking - Freestanding Ice Maker

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. KitchenAid freestanding (built-in or undercounter) ice makers covered by its Product Help pages.

KitchenAid Replace Filter light flashing ice maker repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a child filling two glasses with ice from the door dispenser in a bright family kitchen
For the heart of your home.

Questions
about Replace Filter light flashing.

Can I clear Replace Filter light flashing myself?
Turn the filter to the locked position. If it comes back, it needs a visit.
My KitchenAid ice maker filter is new; why is Replace Filter still flashing?
It is most likely not turned all the way to the locked position. KitchenAid says the light keeps flashing until it is.
Can a KitchenAid undercounter unit make ice with a cracked filter?
It may make little or thin ice. Replace a cracked filter.
When does the KitchenAid filter light come on?
After 9 months or 2,000 gallons of water.

Back to your everyday

Still showing Replace Filter light flashing?

Book with the code or the blink pattern written exactly as the ice maker shows it, the full model number, and whether there is any water on the floor — when there is a code, that is where the diagnosis starts.

(844) 773-0701 Schedule a repair