The dispenser panel on the freezer door of a stainless French door model, a small lock symbol and an ice-off symbol lit, the ice chute below empty and dry.

Frigidaire Water Filter Status telling you to change the filter

Frigidaire's Water Filter Status indicator lights up on most models when it is time to change the filter, and Frigidaire suggests changing it about every six months.

(844) 773-0701

Mon–Sat, 8am–8pm

  • Mode, not a failure
  • No repair needed
  • Source: Frigidaire

Book a visit

Three short steps, about a minute.

or call (844) 773-0701

Before you book,
in this order.

Each step comes from Frigidaire's own guidance for Water Filter Status on its ice makers. Follow it to the end: the last card says whether this is a visit.

01

Replace the filter with the same type currently fitted.

02

Reset the filter status on the display as your use and care guide describes.

03

Run water through the dispenser for a few minutes to clear air, and book a visit if ice stays small with a fresh filter.

Cleared?

The ice maker is filling and dropping cubes again and no part was needed. If the same code returns during the next harvest, or water shows up on the floor again, book it as a new problem.

What not to do

Water Filter Status is not a sign that the ice maker is broken. It also does not measure water quality; it counts time or use.

What you may
notice with it.

The ice maker problems Water Filter Status tends to arrive with. Answer these at the ice maker before anyone is booked.

All problems

No repair indicated

Nothing to repair.

Something the ice maker was switched into, often without anyone noticing, rather than something that broke: ice turned off from the panel or by the wire arm lifted while reaching into the bin, a control lock, a Sabbath setting, a cleaning cycle still running, a reminder that the water filter is due. No part has worn out, and the ice maker's own buttons or arm put it right.

In Frigidaire's own words

On most models, the Water Filter Status on your display will illuminate and prompt you when it’s time to replace the filter.
Frigidaire: How often should I change my water filter? Frigidaire: How often should I change my water filter? Frigidaire: ice maker not making enough ice

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Most Frigidaire models with a water filter and a display.

Frigidaire Water Filter Status ice maker repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a child filling two glasses with ice from the door dispenser in a bright family kitchen
For the heart of your home.

Questions
about Water Filter Status.

Can I clear Water Filter Status myself?
Replace the filter with the same type currently fitted.
How often does Frigidaire want the water filter changed?
Frigidaire suggests about every six months, and sooner if the unit sat unused, for example during a move.
Can an old filter make my Frigidaire ice maker slow?
Yes. Frigidaire names a clogged or overdue filter as one reason the ice maker is not making enough ice.
Does the Frigidaire filter light go out on its own after a new filter?
Usually the status has to be reset on the display after the new filter goes in. Your use and care guide shows the button for your model.

Back to your everyday

Still showing Water Filter Status?

Book with the code or the blink pattern written exactly as the ice maker shows it, the full model number, and whether there is any water on the floor — when there is a code, that is where the diagnosis starts.

(844) 773-0701 Schedule a repair