Kenmore 795 French door
showing Er It
Er It means the ice maker on a Kenmore 795 has a system error inside it.
Mon–Sat, 8am–8pm
- Ice making and harvest
- Ice maker assembly replacement
- Source: Kenmore
Book a visit
Three short steps, about a minute.
or call (844) 773-0701
Loading appointment form…
The appointment form couldn’t load. Please try again.
What Er It
actually means.
Er It means the ice maker on a Kenmore 795 has a system error inside it. Sears points to the ice maker's self-test routine as the check and to the ice maker assembly as the likely part.
Kenmore ice maker display
What to do when Er It shows on the ice makerKind of codeIce making and harvest
The ice maker froze a batch and could not release it, or the harvest never started: the ejector arm or the twisting tray stalled, the mold heater did not loosen the cubes, or the arm that senses a full bin reported the wrong thing. Ice jammed against the arm and a bin pushed in crooked are cleared first; a motor module or a whole ice maker assembly comes after.
Usually leads toIce maker assembly replacement
A new ice maker module fitted in the freezer compartment or the door compartment, after the water, the temperature and the bin sensor have been proved good, so the new part is not blamed for an old problem.
Shows up asNo Ice Coming From the Ice Maker
The mold sits empty or holds one frozen batch that never drops, the bin stays bare for days, and the dispenser gives water as usual: an ice maker not making ice while the rest of the appliance carries on normally.
MakeKenmore
Kenmore ice maker repair, with the series identified from the printed model number before a part is chosen.
SourceSears PartsDirect: Kenmore 795 bottom-freezer error codes (Wayback copy, Jan 2021)
Kenmore and Kenmore Elite bottom-freezer models whose number begins 795, with an ice maker in the French door.
Before you book,
in this order.
Each step comes from Kenmore's own guidance for Er It on its ice makers. Follow it to the end: the last card says whether this is a visit.
Clear any ice jammed in the tray or the bin and make sure the bin is seated.
Reset power for a minute to see whether Er It clears.
Book a visit if it returns; the self-test needs to be run and read.
Still there?
It usually turns into ice maker assembly replacement. Book with the code and the model number.
What not to do
Er It is not a water supply code; Er gF covers water flow. It also does not mean the ice maker sensor alone has failed, which Kenmore shows as Er IS.
What you may
notice with it.
The ice maker problems Er It tends to arrive with. Answer these at the ice maker before anyone is booked.
All problems
Where Er It usually leads
Ice maker assembly replacement.
Kenmore
ice makers.
Kenmore ice maker repair, with the series identified from the printed model number before a part is chosen.
Kenmore ice maker repair
Door ice maker
The ice maker that feeds the dispenser on the outside of a door: tucked into an insulated box in the left door of a French door model, or at the top of the freezer side of a side-by-side, with a chute and an auger carrying cubes to your glass.
Freezer ice maker
The ice maker that sits inside the freezer compartment itself, a tray that twists or a mold with a heater and an ejector, dropping cubes into a bin or drawer you open by hand, with no dispenser on the door.
In Kenmore's own words
System error inside ice maker
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Kenmore and Kenmore Elite bottom-freezer models whose number begins 795, with an ice maker in the French door.
Kenmore Er It ice maker repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about Er It.
Can I clear Er It myself?
What is the self-test Sears mentions for Er It on a Kenmore?
Can jammed cubes cause Er It on a Kenmore 795?
Does Er It mean replacing the whole Kenmore ice maker?
Back to your everyday
Still showing Er It?
Book with the code or the blink pattern written exactly as the ice maker shows it, the full model number, and whether there is any water on the floor — when there is a code, that is where the diagnosis starts.