A freezer ice maker seen from below with its bin pulled out, a row of half-released crescent cubes caught on the ejector arm over the gray mold.

Viking nugget model: ICE lamp blinking with Er03

On Viking's FNIU515D, Er03 is an evaporator temperature error shown by the ICE lamp blinking: 10 minutes into ice making, the evaporator has not dropped below 32°F.

(844) 773-0701

Mon–Sat, 8am–8pm

  • Ice making and harvest
  • Ice maker assembly replacement
  • Source: Viking

Book a visit

Three short steps, about a minute.

or call (844) 773-0701

What Er03
actually means.

On Viking's FNIU515D, Er03 is an evaporator temperature error shown by the ICE lamp blinking: 10 minutes into ice making, the evaporator has not dropped below 32°F. It is an earlier check on the same cooling problem that Er01 reports at 30 minutes.

Viking ice maker display

What to do when Er03 shows on the ice maker

Before you book,
in this order.

Each step comes from Viking's own guidance for Er03 on its ice makers. Follow it to the end: the last card says whether this is a visit.

01

Rule out the normal blinking patterns first: once a second means the washing cycle, and two seconds on, one off means a full bin.

02

Clear the front grille and check the room temperature.

03

If the ICE lamp keeps blinking with the bin not full and no cleaning cycle running, book a visit.

Still there?

It usually turns into ice maker assembly replacement. Book with the code and the model number.

What not to do

A blinking ICE lamp on this model is not always a problem. It also blinks during washing and when the bin is full, so the pattern and the bin level matter.

What you may
notice with it.

The ice maker problems Er03 tends to arrive with. Answer these at the ice maker before anyone is booked.

All problems

Where Er03 usually leads

Ice maker assembly replacement.

Ice maker module, mold or twisting tray · moderate.

In Viking's own words

passed during the ice making (Er03)
Viking FNIU515D 15-inch panel-ready nugget ice model owner's guide (Viking's Middleby CDN PDF) Viking FNIU515D 15-inch panel-ready nugget ice model owner's guide (Viking's Middleby CDN PDF) Viking FNIU515D 15-inch panel-ready nugget ice model owner's guide (Viking's Middleby CDN PDF)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Viking FNIU515D panel-ready nugget model with drain pump; the three lamps are ICE, NO WATER and DRAIN on the display panel.

Viking Er03 ice maker repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a child filling two glasses with ice from the door dispenser in a bright family kitchen
For the heart of your home.

Questions
about Er03.

Can I clear Er03 myself?
Rule out the normal blinking patterns first: once a second means the washing cycle, and two seconds on, one off means a full bin. If it comes back, it needs a visit.
How can I tell Er03 from a full bin on my Viking nugget ice maker?
Look at the bin and the rhythm. A full bin gives two seconds on and one second off with plenty of ice; Er03 blinks while the bin is short of ice.
Why would the evaporator stay warm on a Viking nugget unit?
Blocked airflow, a hot room, a sensor problem or a refrigerant problem can all slow cooling. The first two are easy to check; the rest needs a technician.
Is Er03 on a Viking the same as Er01?
They describe the same condition at different points. Er03 is flagged at 10 minutes, Er01 at 30 minutes with all three lamps blinking.

Back to your everyday

Still showing Er03?

Book with the code or the blink pattern written exactly as the ice maker shows it, the full model number, and whether there is any water on the floor — when there is a code, that is where the diagnosis starts.

(844) 773-0701 Schedule a repair